Why does my laptop keep turning off when I unplug it?

If your Windows 10 laptop suddenly turns off when you unplug its power cord, then you’ve come to the right place as this post will guide you on how you can fix this issue.

One of the most common causes for this kind of issue is that there is some problem with your laptop’s battery. It is possible that it might have gone bad or has been damaged. However, this couldn’t be the case especially if the laptop is new. The problem could have something to do with the system settings, connections, laptop hardware, and so on. To fix it, there are various suggestions you can check out such as follows:

Option 1 – Perform a hard reset on your laptop

This option works in most cases when the laptop with a removable battery is charging slowly as it is plugged in constantly. Refer to the steps below to do a hard reset on your laptop.

1. Switch off the power of your laptop.
2. Disconnect your laptop’s charger and then remove the battery.
3. Tap and hold the power button for at least 30 seconds – doing so will discharge the capacitors of the motherboard and reset the memory chips that were active constantly.
4. Plug the battery back and then charge the laptop again.

Check if the problem is fixed, if not, proceed to the next option below.

Option 2 – Try to change the Power Options

• Tap the Win + R keys to open the Run utility.
• Then type “powercfg.cpl” and tap Enter to open the Power Options window.
• Next, go to your selected power plan and click the “Change plan settings” option to open a new page.
• From there, click on the “Change advanced power settings” option. This will open a new window where you can see various power consumption options.
• Now on the next window that appears, click on “Change advanced power settings”. This will open another window where you have to expand the Processor power management > Maximum processor state.
• Then change the value for On battery mode to 25% and enable Adaptive brightness.
• Now shut down your computer and try to boot it with the power cord unplugged.

Option 3 – Try to run the Power troubleshooter

The next thing you can do is to run the Power troubleshooter. To do so, follow these steps:

• Go to Settings and navigate to Update & Security > Troubleshoot.
• After that, look for the “Power” option from the given list of built-in troubleshooters and click on it.
• Next, click on the “Run the troubleshooter” button to run the Power troubleshooter.
• Once the troubleshooter is done identifying the problems, follow the next on-screen instructions to resolve the problem.

Option 4 – Try to run the Power Efficiency Diagnostics Report

You could also try to run the Power Efficiency Diagnostics Report to fix the problem. This tool is helpful and will help you analyze the status of the battery but note that this can be quite overwhelming especially if you’re not well-versed in this matter.

Option 5 – Try to uninstall or reinstall the Battery driver

You might also want to uninstall or reinstall the battery driver as it can also resolve the problem. But before you start, you have to shut down your computer and remove the power chord as well as the battery. Once you’re done, follow these steps:

• Plug the power cord and restart your computer.
• Once your computer has restarted, tap the Win + R keys to open the Run utility and type “devmgmt.msc” in the field and tap Enter to open the Device Manager.
• After that, look for the “Batteries” driver from the list of drivers and expand it.
• Then right-click on the “Microsoft ACPI-Compliant System” driver and click on the “Uninstall device” option.
• Once it’s done, restart shut down your computer and remove the power cord and then attach the battery.
• Now attach the power chord again and restart your computer to automatically install the driver.

Option 6 – Try to update the BIOS

Updating the BIOS can help you fix the problem but as you know, BIOS is a sensitive part of a computer. Even though it is a software component, the functioning of the hardware depends on it largely. Thus, you must be careful when modifying something in the BIOS. So if you don’t know much about it, it’s best if you skip on this option and try the other ones instead. However, if you are well-versed in navigating the BIOS, then follow the steps below.

• Tap the Win + R keys to open the Run dialog box.
• Next, type “msinfo32” in the field and press Enter to open System Information.
• From there, you should find a search field on the bottom where you have to search for the BIOS version and then press Enter.
• After that, you should see the developer and version of the BIOS installed on your PC.
• Go to your manufacturer’s website and then download the latest version of BIOS on your computer.
• If you are using a laptop, make sure that you keep it plugged in until you have updated the BIOS.
• Now double click on the downloaded file and install the new BIOS version on your computer.
• Now restart your computer to apply the changes made.

Note: If updating the BIOS didn’t help, you might want to consider resetting it instead.

Congratulations, you have just fixed the Windows laptop turns off when unplugged error in Windows 10 all by yourself. If you would like to read more helpful articles and tips about various software and hardware visit errortools.com daily.

Now that’s how you fix the Windows laptop turns off when unplugged error in Windows 10 on a computer. On the other hand, if your computer is going through some system-related issues that have to get fixed, there is a one-click solution known as Restoro you could check out to resolve them.

This program is a useful tool that could repair corrupted registries and optimize your PC’s overall performance. Aside from that, it also cleans out your computer for any junk or corrupted files that help you eliminate any unwanted files from your system. This is basically a solution that’s within your grasp with just a click. It’s easy to use as it is user-friendly. For a complete set of instructions in downloading and using it, refer to the steps below

Perform a full system scan using Restoro. To do so, follow the instructions below.

1. Download and install Restoro from the official site.
2. Once the installation process is completed, run Restoro to perform a full system scan.
   
3. After the scan is completed click the “Start Repair” button.
   

Hi Kastara, my name is Neil, I'm an independent adviser and a Windows 10 user like you. Sorry you're having this problem with your power supply / battery on your laptop. As a possible fix, with your laptop turned off, unplug the charging cable from the laptop and then remove the battery from the laptop and leave it out for at least 5 minutes. During this time, open your laptop and press and hold the power button for 10 seconds. This will eliminate any remaining charge held by your laptops components. Afterwards, plug your battery back in, plug the charging cable back in, and then turn your laptop back on and see if it charges normally. Give it some time to charge. Then remove the charging cable and see if your laptop remains on, or if it still powers off. If your laptop turns off immediately when you unplug it from a power source, it means your battery is not working. Most likely, your battery has reached the end of its useful life and has stopped holding a charge. Sometimes, laptop batteries can stop working out of the blue. This can happen if there is a short circuit in the internal components of the battery. While most batteries are pretty rugged, extreme heat or cold, contact with liquid, or a sharp jolt from bumping or dropping your laptop can damage the battery. Another possibility is that the battery connector inside your laptop is damaged. This can happen for the same reasons the battery itself might get damaged. If it doesn't hold a charge anymore and your laptop is still within the warranty period I would contact your laptops manufacturer and claim on your warranty. If it is outside of warranty repair then you might want to purchase a replacement battery. You should be able to do this from your laptop's manufacturer, or you can find cheaper, suitable replacements on Amazon or eBay. In the meantime, although you won't overcharge your battery by leaving it in your laptop, you should be able to use your laptop without the battery being plugged in if this bothers you. Just remember that your laptop will instantly shut down the moment it is unplugged from the power source.

I hope this answers your question. Let me know if you need more help.

Type of abuse Harassment or threats Inappropriate/Adult content Nudity Profanity Software piracy SPAM/Advertising Virus/Spyware/Malware danger Other Term of Use or Code of Conduct violation Child exploitation or abuse

Details [required]:

29 people found this reply helpful

Was this reply helpful?

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.